When assigned a Prop X Box load, the following steps should be followed by a driver.

Step 1

Once dispatch has assigned a load to a driver, that driver will check into the PD Driver mobile app where they will see a load assigned to them.

Step 2

When selecting the load is assigned the driver can either accept or reject the load. Rejecting the load will let dispatch know that the driver is not going to take that load.

Step 3

If the driver accepts the load and is at the terminal they will select arrive.

Step 4

Once the driver has received sand in their boxes and received the ticket (BOL) from the terminal, the driver will enter the following information below.

• Ticket Number
• Gross Weight 
• Truck Ticket - Driver will need to take a picture of the ticket (BOL)
• Boxes - boxes will need to be scanned and the weight of each box will need to be entered in
• Add Comments (Optional)

IMPORTANT: Driver needs to check the box at the bottom to depart from the terminal.

Step 5

While the driver is In Transit they will see the screen below that details all the load information just entered. Once they reach the destination the driver will select "Arrive".

Step 6

Once the driver has delivered the full boxes and scanned the empty boxes they pick up, they will select "Deliver Load and Depart".

Step 7

Once the load is complete the driver can review the load details of the completed load.